Sanitary Lance AssemblySanitary Lance Assembly

Sanitary Lance Assembly

Product Details: Item No. 28

Components: Two ball valves, two air actuators, infeed manifold, push rod assembly, air cylinder, machined spool valve, and stainless tubing all with tri-clover fittings rated for food grade applications

Material: Food grade, 316 stainless steel

PRINT THIS PAGE

Add to Comparison

Overview

Each lance has a machined spool attached to a push rod. An air cylinder raises and lowers the push rod to open and close the foot valve, (spool) at the end of the lance. The infeed manifold includes two, full-port ball valves with air actuators to help eliminate any product hammering during the filling cycle.

The entire sanitary lance assembly is mounted with hand toggle clamps, the only filler on the market with this no-tools-required change over feature. Once the air lines have been detached, the lance assembly can easily be removed and another lance assembly can be mounted in a matter of minutes.

Other materials and/or coatings used for valves and lances are;

  • PVC
  • Kynar
  • Teflon
  • Hastelloy
  • Titanium
  • electric heat traced

Specialty Equipment has standard and custom made filling machines installed worldwide that handle liquids that are; flammable, corrosive, toxic, abrasive, sanitary, foamy, and highly viscous. Some liquids are hot as 375 degrees F and some are thicker than axle grease.

Compare with similar products

compare this product with similar products from this category

Current Product: Sanitary Lance Assembly
ExcerptProduct Details: Item No. 28 Components: Two ball valves, two air actuators, infeed manifold, push rod assembly, air cylinder, machined spool valve, and stainless tubing all with tri-clover fittings rated for food grade applications Material: Food grade, 316 stainless steel PRINT THIS PAGE
DimensionsN/A
Kynar Lance Assembly
ExcerptComponents: Two ball valves, two air actuators, infeed manifold, push rod assembly, air cylinder, machined spool valve, and Kynar tubing Material: Machined Kynar PRINT THIS PAGE
DimensionsN/A
Bung & Capping Stations
ExcerptProduct Details: Model BC-550 / Item No. 26 Rate: Bung and cap one drum per minute Container: 30 to 55-gallon steel and poly drums Material: Carbon or stainless steel construction
DimensionsN/A
Data Printout
ExcerptProduct Details: Item No. 29 Components: Okidata or Epson printer, paper, programming, and platform stand Material: Steel, plastic and paper PRINT THIS PAGE
DimensionsN/A
Filler Controls
ExcerptProduct Details: Item No. 30 Components: NEMA 4 standard control panel complete with PLC, touch screen, weight meter, AC and DC power supply, all Allen Bradley components, wiring, and programmed – Pneumatic panel is below electrical panel, mounted on the same stand Material: Carbon or stainless steel panels PRINT THIS PAGE
DimensionsN/A