Slip-Sheet Dispensers
Product Details: Item No. 305
Model: SSD-1000
Capacity: Pneumatically handles an 18” stack of corrugated sheets
Use: To automatically discharge a corrugated sheet onto a waiting pallet every two minutes, or when called
Material: Carbon or stainless construction
- Overview
- Description of Operation
- Technical Specifications
- More Alternative Equipment
- Product Details
Overview
This slip-sheet dispenser is designed to discharge a corrugated sheet onto a waiting pallet. Corrugated sheets are being applied to every pallet before they are loaded with parts. A corrugated sheet will be picked-up from an 18″ high stack sitting in a collection bin and deposit it onto a waiting pallet, every two minutes. The system consists of five components;
- An automatic pallet dispenser that feeds the machine
- An air operated overhead shuttle that carries the vacuum carriage back and forth
- An up/down four cup, vacuum assembly that picks-up the sheets
- A collection bin for the stack of corrugated sheets
- The discharge pallet conveyor
Description of Operation
This model SSD-1000 slip-sheet dispenser will pick up and discharge a corrugated sheet onto a waiting pallet every two minutes or when called, automatically.
- The automatic pallet dispenser sends a pallet to a waiting station
- Upon arrival, it signals a shuttle overhead to activate
- The shuttle moves across the rails and stops over a bin of corrugated sheets
- A vacuum cup assembly lowers onto the stack of sheets
- A sheet is picked up and signals the shuttle to move
- The shuttle conveys to the pallet position and stops
- The sheet is lowered onto the pallet and released
- The vacuum assembly raises and stops, awaiting another cycle
- A signal is sent to start the floor conveyor to discharge the pallet
- A new pallet is then discharged from the pallet dispenser
- The cycle repeats
Technical Specifications
This slip-sheet dispenser will automatically pick up and discharge a corrugated sheet onto a waiting pallet every two minutes or when called.
- The pallet dispenser has a 20 pallet magazine
- Dispenser can send a pallet out every 20 seconds
- Dispenser has a scissors lift between a two strand conveyor
- Floor conveyor is a chain driven live roller
- System is controlled by an Allen Bradley PLC
- All controls are enclosed in a NEMA 12 panel
- Shuttle has four vacuum cups and four wheels
- Pneumatic cylinder raises and lowers the carriage
- Shuttle back and forth is actuated by an air cylinder
- Body construction, 4″ square tubing, welded structure
- Shuttle carriage uses welded 4″ square tubing
- Fully assembled, wired, piped, and tested machine
This automatic sheet dispenser is built to run twenty-four hours a day, seven days a week.
