Item No. 311
Pallet Dispenser – Medium Duty
This machine is the little brother to our heavy duty pallet dispenser, (item 301, built to run 7/24) because it functions very well on a day to day basis under normal, one or two shift, plant operations. It is an air-over-electric pallet dispenser designed to handle the same size pallet in a stack up to five feet tall. The machine will automatically dispense pallets straight ahead from the bottom of the magazine at a rate of two pallets per minute. Pallets are loaded into the back of the magazine then discharged out the front. A pair of air operated clamps attaches to the second pallet in the stack, allowing the bottom pallet free to convey out of the magazine.
The machine includes a two strand chain discharge conveyor, but can be substituted for a chain driven live roller conveyor, if the bottom boards are running the right way. It can also be adapted to discharge a pallet onto the floor, to accommodate a pallet jack. A taller stack of pallets is also possible with the twenty pallet magazine option.
Specialty Equipment manufacturers the highest quality pallet dispensers, conveyors and filling machinery. All the equipment carries with it a well known reputation for rugged, long lasting construction.
Description of Operation
- A fork truck loads the magazine with a stack of pallets up to 5′ high
- A double set of pneumatic clamps attaches to the second pallet in the stack
- When called for, the second pallet in the stack is raised by air bags
- The bottom pallet, on the discharge conveyor, drives out of the dispenser
- The stack is then lowered and the clamps are released
- The outboard air bags raise the clamps to the level of the second pallet
- The double set of pneumatic clamps again attaches to the second pallet
- The cycle repeats for a rate of two pallets per minute, if desired
- This is an air-over electric operating machine
- Heavy duty, long-life air bags are used for all moving devices
- Two pair of pneumatic steel clamps pivot and hold up the stack
- The pivoting clamps are activated by two heavy duty air bags
- Chain conveyor has two strands of 2060 chain
- Chain conveyor powered by a 1/2 HP gear motor drive
- Chain conveyor extend 18″ beyond dispenser magazine
- Dispenser is controlled by an Allen Bradley PLC
- All necessary controls are enclosed in a NEMA 12 panel
- Body construction is 4″ square tubing, all welded structure.
- All OSHA compliant guarding is provided
- The overall dimensions are, 8 ft. tall x 6 ft. wide x 6 ft. deep
- This is a fully assembled, wired, piped, and tested machine.
- The discharge rate is two pallets per minute
- Twenty pallet magazine
- Discharge pallets on floor for pallet jack
- Ethernet card option
- Safety swing-out gates
Additional Equipment Available
- Heavy duty pallet dispenser
- Roller & belt conveyors
- Chain conveyors & transfers
- Turntables & Transfer cars
- Single drum & pail fillers
- Stainless steel fillers
- Stainless steel conveyors
- Custom handling equipment