Filler Options

Fume Skirts for Fillers - Item #: 22

This is a very popular filler accessory, because it is the least expensive device for removing up to 99% of dangerous fumes from the filling station. This Teflon bellows/skirt is designed to accept and collect the fumes during the drum or tote filling cycle. It is also a safety device,…

Flush Adapters - Item #: 23

The flush adapter is built for a clean-in-place operation where the lance remains on the filler machine while the infeed manifold, valves and lance are flushed out to remove any contaminants. The flush adapter device attaches to the lance and can rotate 360 degrees. It can be standing on the…

Nitrogen Purge - Item #: 24

Nitrogen purging is done to dry and decontaminate the container by evacuating the air inside it. Purging can be done automatically, before, during, and after the filling cycle. The purging of a drum is done by forcing nitrogen gas through the filling lance into the container. The standard filler lance…

Lances and Valves - Item #: 25

All standard filling lances are made with 316 stainless steel tubing. Each one has a machined spool that is glass-filled and Teflon seated and sealed, attached to a push rod. An air cylinder raises and lowers the push rod to open and close the foot valve at the end of…

Bung & Capping Stations - Item #: 26

Most drum filling applications require bungs and labels to be applied directly after the the filling operation. The in-line bung and capping station, shown above, is the most popular operation. In a typical application, a powered conveyor will receive a filled container, or pallet load of drums, and while the…

Lance Rack - Item #: 27

When using multiple filling lances, because of varied products, and to prevent product contamination, it’s a good idea to have some kind of lance rack. The rack is popular for production and batch filling operations, especially when it calls for quick change-over filling lances. The rack protects your investment from…

Sampling Valve - Item #: 28

If you are filling a production run, you’ll probably require an occasional sample of the product running through the filler, to test the integrity of the liquid. A manual sampling valve, as part of the filling lance, will do that for you. Typically, the sample is taken before the start…

Filling Data Print-Out - Item #: 29

Many customers require constant data and information about their filling operation for their records. For these reasons, Specialty Equipment came up with the necessary items to provide data from the filling operation that can be sent directly to the company mainframe, or a hard copy report that can be provided…

Filler Controls - Item #: 30

Specialty manufactures all its fillers and conveyor systems with the necessary controls. Each control panel is built, programmed and tested at the plant, along with the fillers, conveyors and pneumatic devices to be controlled. Specialty has built, programmed and installed liquid fillers with control panels in hazardous, corrosive, toxic, flammable,…