Custom Applications

Stainless, Fume Booth Drum Filler - Item #: 66

Here is a custom-made, all-316 stainless steel filler, built within a¬†two station fume booth. This system was designed for a major chemical manufacturer to fill hot, viscous, and toxic liquids into 55 gallon drums. The need was for a safer filling system, because the liquid was too dangerous for the…

Drawbridge for Pallets - Item #: 148

This is a custom made conveyor application, built for a customer in the manufacturing of hard goods. There aren’t too many ways to raise a ten foot long conveyor, but Specialty Equipment has built several special lifts, gates, and drawbridges similar to the one shown above. The load being conveyed…

Accumulation Conveyor for Wide Loads - Item #: 159

Accumulation conveyor allows the gathering of products in-line and holds them until needed. In the case of the photo above, accumulation provided a bank of corrugated material in-line and balanced production between each machine in the process. The photo shows a custom-made, double width, belt driven live roller accumulation conveyor,…

Drum Lid Press - Item #: 204

This is a custom made system, designed to press and hold two sealed lids of 55 gallon drums in place while rings are clamped and sealed over each drum. The watertight thick seal made it impossible for any operator to manually hold down each lid, so the machine was created…

Fume Booth Drum Filler - Item #: 801

When filling hazardous chemicals, a fume booth allows the most amount of operator safety, because it shields operators from toxic fume, corrosive and flammable chemicals. This custom made filler-in-a- fume booth, is unique because is has all the bells and whistles. It was designed for a chemical company to fill…

Fume Booth Filler for Drums & Totes - Item #: 803

Here is a custom made, semi-automatic, palletized drum and tote, liquid filling system contained within a special fume booth. This system will fill corrosive chemicals into drums and totes. To begin with, everything is made of stainless steel. The entry and discharge points are air operated guillotine doors with clear…

Robot Loading Station - Item #: 805

Here is a perfect example of a custom designed and built system. This is a bulk box loading station, otherwise known as a BAD, a “Box Alignment Device.” It serves a high speed robot that will fill the box with 80 lb rubber bales. In the first photo, the air…